A maze of cords and wires can be found in any workstation, entertainment center, utility closet, or drawer. In addition to being unattractive, these can cause obstructions and can be a health hazard if left unsettled. Besides, it is impossible to determine what gadget is connected to a socket, which, in turn, becomes quite challenging to locate the necessary cord in storage.
God forbid you unintentionally disconnect something crucial while it’s updating. Keeping your electronics cords organized keeps everything functioning properly and gives your room a neat appearance.
Parallelly, whenever feasible, switching to wireless technology is undoubtedly the most straightforward approach to streamline your cord and cable situation. You’ll need a good router to accomplish that.
However hard you try, you will never be able to cut all the cables. So, simplify the ones you need. To keep them from hanging everywhere, fasten them to the baseboards or the back of your desk. One can even label the essential ones and make them easy to find.
To get the job done, you don’t have to spend your entire paycheck on trinkets from an organizing store. The majority of the materials you require are already in your house. You might spend no more than a few bucks at a hardware shop or online.
Having said that, these are a few creative ways to hide and manage power cords/cables.
1. Attach cords against furniture
If you place the furniture appropriately, you can hide any power cord, whether the aesthetic design is modern, classic, contemporary, or eclectic. To keep wires out of sight, thread them down the rear leg or wall of your nightstand using wire clips rather than having them run along the wall or floor. Alternatively, run electrical lines around the back of your furniture using a hook.
To further hide it, you can even paint the cord the same color as the furniture. Remember, the cord is still there, but it is considerably less unsightly. This method, which doesn’t require a hammer, is among the easiest and most economical ways to conceal cords.
2. Cover them with a rug
Do you want to know how to quickly conceal cords?
One straightforward approach to hiding cords is to run them under a rug. To keep them moving smoothly along the floor, experts advise applying a small amount of electrical tape over the cords. Additionally, if you have corded goods that are too far from the rug’s edge, you might consider making a tiny hole. This way, you can slip the cable through it and conceal it as it travels to the closest outlet.
3. Make an appealing cord wrap
In an emergency, you can always get a cord cover or use a storage box to conceal your Wi-Fi router (just make a hole in the back). However, if you want a solution that genuinely complements the design of your house, think about do-it-yourself. For instance, you may skillfully construct a pedestal in the living room above with a hollow back to hold a Wi-Fi network and electrical connections or cables.
4. Line up your baseboards with them
Integrating wires into your baseboards is a terrific way to hide them. Start by flattening and securing them along the top of your baseboard with tiny clips or staples—a procedure you’ve probably heard of before. Now, reveal the ultimate designer trade secret: once assembled, paint them the same shade as your baseboards.
Moving on, you may also paint your floor lamp cord in a similar color and pin it appropriately. Just white would do all day long.
5. Use battery-operated devices instead
Sometimes, the best approach is prevention.
Choose battery-operated or rechargeable solutions for your light fixtures and other household equipment to prevent ever having to deal with cord concealment. When it comes to wall-hanging lights, one of the most recent do-it-yourself tips is to use puck lights that run on batteries instead of the cord. To avoid hardwiring sconces through masonry (or hiring an expensive electrician), you may do the project yourself. Nothing would give you the delight of doing the exercise yourself.
6. Paint and hang the cord covers
A cable concealer kit, sometimes referred to as a cable raceway, is a comparable method of concealing cords for a mounted TV. It’s a flat, smooth PVC cover that adheres to the wall immediately, saving you from drilling any more holes.
All you need to do is snap the cover on top after bundling the cables. Moreover, cable raceways can also be painted over; just be careful to match the color of your walls precisely so they fit in perfectly.
Moving on, cord covers work best for TVs and monitors. To add flair to a plug-in wall sconce and match the finish, consider adding a thin brass cable cover to the lighting above nightstands. What it does is, it gives the otherwise vintage nightstand a contemporary spin with its sleek appearance and feel.
In the end!
These are practical, fast fixes for concealing your cables and a more imaginative take on conventional techniques like painting or wire sheaths. Whichever you choose, ensure that you do justice to your space and do not compromise on any aspect. Ultimately, practicality goes hand in hand with comfort and aesthetics. After all, leaving power cords unattended for an extended period can cause wear and tear and become a considerable health hazard for people living in the same space.
